Evodent Phantom Lab Simulation Unit for Single Student Dental Training with Foot Control and Drainage

Description

Evodent Phantom Lab Simulation Unit is a complete single-student dental simulation setup used for preclinical training, hands-on practice and skill development in dental colleges, training institutes and simulation labs. It combines a phantom head, movable treatment unit, water system, suction and foot control in one compact workstation designed for one learner.

This unit does not include an operating light. It is designed for institutions that need a dedicated phantom lab simulation station for individual student training.

What This Evodent Phantom Lab Simulation Unit Is Used For

This unit gives students a realistic dental training environment where they can practice clinical posture, hand skills, instrument control and typodont-based procedures before working on patients.

• Single student simulation: One complete station for one learner.
• Dental college training: Useful for daily practical sessions and skill labs.
• Workshop use: Suitable for short hands-on courses and continuing education programs.
• Faculty demonstration: Helps instructors teach positioning, ergonomics and instrument workflow.
• Skill development: Supports repeated practice in a controlled setup.

Why Dental Colleges Buy This Unit

Dental colleges usually need multiple simulation stations where each student can practice independently under faculty supervision. This phantom lab simulation unit works well for that purpose because it gives one learner a defined workstation with phantom head positioning, air-water workflow, suction and foot control.

• Individual student station: Helps colleges assign one unit per student during practical sessions.
• Batch training: Useful when the same exercise must be repeated across many students.
• Faculty supervision: Instructors can check posture, handpiece control, visibility and working sequence at each station.
• Skill lab setup: Suitable for conservative dentistry, endodontic, prosthodontic and basic operative practice sessions.
• Standardized training: Helps keep student practice more consistent compared with loose table-based practice.

What Is Included in This Simulation Unit

• Phantom head with torso setup
• Electric movable simulation therapy unit
• 3-way syringe
• High-speed handpiece tubing (2 sets)
• Low-speed handpiece tubing (1 set)
• Weak suction system
• Water purification system
• Water collection / drainage system
• Foot control switch

Movement and Training Features

This phantom simulation unit is built for realistic operator positioning and chairside workflow practice.

• Head pitch movement: Approx. 0° to 90°
• Back recline range: Approx. 0° to 180°
• Electric vertical movement: Approx. 600mm to 750mm
• Compact mobile base: Suitable for simulation labs and training rooms.

Compatible Training Models

This unit can be used with compatible phantom-head-ready dental models from Evodent as well as compatible training models from Nissin, Frasaco, Columbia and similar systems when the mounting interface matches.

• Evodent compatibility: Evodent PRO, CORE and ATLAS series models where the mounting setup matches.
• Other compatible brands: Nissin, Frasaco, Columbia and similar phantom-head-ready typodont models.
• Before ordering: Check mounting type and model fit if using non-Evodent typodonts.

Training Areas This Unit Can Support

The exact procedure depends on the typodont or model mounted on the phantom head, but the unit can support many common dental college training exercises.

• Operative dentistry: Cavity preparation, restoration sequence and instrument control.
• Endodontics: Access opening and root canal training with compatible models.
• Prosthodontics: Crown preparation, bridge preparation and impression-related demonstrations.
• Ergonomics: Student posture, mirror use, visibility and operator position.
• Water and suction coordination: Air-water syringe use, weak suction and drainage workflow.

For Dental Colleges, Students and Simulation Labs

This unit is commonly used in dental colleges, simulation labs, private training centers and hands-on workshops where every learner needs an individual phantom training station.

• Dental colleges building simulation labs
• Training institutes teaching restorative, endodontic and operative workflows
• Students practicing ergonomics and hand skills
• Faculty-led workshops and continuing education courses

How to Use This Phantom Lab Simulation Unit

Mount a compatible typodont or dental model, connect the required air and water supply, position the phantom head and begin the planned training exercise.

• Connect air and water supply.
• Mount the compatible training model.
• Adjust working height and phantom head position.
• Use the foot control to simulate instrument workflow.
• Practice procedures under faculty guidance or workshop protocol.

Technical Specifications

• Product type: Phantom lab simulation unit
• Training capacity: Single student station
• Voltage: ~220V
• Frequency: 50Hz
• Air pressure: >0.55 MPa
• Water pressure: 0.2 MPa to 0.4 MPa
• Back recline: 0° to 180°
• Compatible model systems: Evodent, Nissin, Frasaco, Columbia and similar systems where mounting fit matches

FAQs – Evodent Phantom Lab Simulation Unit

Q. What is the Evodent Phantom Lab Simulation Unit used for?
A. It is used as a single-student dental simulation station for dental college training, phantom lab practice, faculty demonstrations and hands-on skill development.

Q. Why do dental colleges buy this simulation unit?
A. Dental colleges buy this unit to create individual phantom training stations where students can practice posture, handpiece control, suction coordination and typodont-based procedures under faculty supervision.

Q. Does this unit work with Nissin, Frasaco or Columbia models?
A. Yes, it can work with compatible Nissin, Frasaco, Columbia and similar phantom-head-ready dental training models when the mounting interface matches. Buyers should confirm mounting fit before ordering.

Q. Which Evodent models can be used with this unit?
A. It can be used with compatible Evodent PRO, CORE and ATLAS series training models when the mounting setup matches the phantom head.

Q. Does this unit include suction and water systems?
A. Yes. It includes a weak suction system, water purification system, water collection / drainage system and foot control as part of the standard setup.